Industrial & Architectural Metals
Get a fast quote now!

CBC Specialty Metals Carries C110 Electrolytic Tough Pitch Copper

C110 Copper has high electrical and thermal conductivity, good corrosion resistance and solderability. C110 Copper is used for welding fixtures, anodes, bus bar in electrical power installations, ground straps, commutators and current-carrying hardware. Its inherent fabrication qualities readily permit it to be bent, soldered, drilled, peened, riveted and formed to fit almost any design specification. This copper has excellent hot workability. It becomes soft and ductile at a red heat.

Available Formats

C110 Copper is available in the following formats:


  • Widths up to 60” (1.524m)
  • Gauges .021” (0.5334) – .1875” (4.762mm)
  • Tempers DDQ – ½ Hard
  • Variety of Finishes


  • Widths up to 36.5” (927.09mm)
  • Gauges .250”(6.35mm) – .75”(19.04mm)
  • Standard Temper


  • 12’ (3.657m) and 20’ (4.8767m) Lengths
  • Outside Diameters 1” (25.4mm) – 2.5” (63.5mm)
  • Schedule 40 and Schedule 80


  • Gauges from .032” (0.8128mm) – .043” (1.0921mm)
  • Diameters from 14” (355.59mm) – 19” (482.59mm)
  • Variety of Tempers

Flat Bar / Bus Bar

  • Thicknesses from 3/32” (.0937”) to 1”
  • Widths up to 8”
  • Full Round Edge, Radius Corner, and Square Edge available
  • Some sizes available in Tin Plated

Round Bar

  • Diameters from 1/8” (.125”) to 8”
  • Hard Drawn Temper

For more information, please see our copper alloys info chart.

Please Note: Due to the fluidity of the metal business, we may not have all items in stock, and we may have in stock items not listed above. It is best to contact us to learn more about stock quantities and to receive a fast quote.

Copyright CBC Specialty Metals 2018 - Legal
Created by

Legal notice